Pit mounted turntables are great for seamless integration into your assembly needs, featuring custom heavy duty design and low maintenance cost with minimal wear and tear. We have different styles of tables that will fit your needs from Air Caster to Mechanical turntables. Our pneumatic turntables are fitted with Airfloat air caster technology, the low profile design works by creating a thin layer of air between the base and the top of the table, making the table nearly friction-free while moving loads effortlessly. An alternative to air caster turntables, our mechanical turntables use a slewing bearing and drive units. These tables have high weight capacities, sizes, and the ability to run extended amounts of time. These turntables are also excellent for outdoor areas or areas that an air supply cannot be easily connected.
Mechanical Pit Mounted Turntable
Align mechanical turntables have a weight capacity ranging from 10,000 to 1,000,000 lbs and sizes anywhere from 3 to 100 ft in diameter. We also build custom heavy duty tables for any size and load capacity, including special fixtures or load support. Our turntables are low maintenance, easy to install, and can be integrated into existing rails and robotic systems.
High-performance bearing handling high capacity loads from 10,000 to 1,000,000 lbs and large size requirements of 3 to 100 ft diameter.
Designed to minimize wear and potential downtime with very few moving parts and can feature an automatic lubrication system that allows for low friction operation.
Our engineers work with you to meet your assembly needs like custom sizes, capacities, restrictions and features like rails and robotic integration.
Photos of a Pit Mounted Mechanical Turntable
Air Caster Pit Mounted Turntable
Airfloat Industrial Turntables standards range from 12,000 lbs to 16,000 lbs capacities, 84 to 144 inch diameter and a low profile of only 7 inches in height. They can be fitted with risers, center dividers, corner angle locators, conical locators, Lead-ins and rack sensors. We also can build custom heavy duty turntables to any size and load capacity, including special fixtures or load support hardware. Our turntables are built to allow all components to be removed or replace without taking the load off the table, keeping down time to a bare minimum.
Our Air Casters only utilize a 100% urethane diaphragm design with superior wear resistance for moving loads effortlessly.
Our turntables allow for components to be replaced without taking the load off the table, keeping downtime to a bare minimum.
Our engineers work with you to meet your assembly needs like custom sizes, capacities, restrictions and features like rails and robotic integration
Photos of a Pit Mounted Air Caster Turntable
Video of Pit Mounted Turntable in Action